Stopping While Embroidering - Brother PE-780D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Stopping while embroidering

If the embroidery is stopped before it is complete,
check the current needle count before turning off the
machine.
Memo
When the machine is turned off, the
embroidery size and layout return to the
original setting.
a Press (Start/stop button) to stop the
machine.
b Check the current needle count on the screen
and make a note of it.
If the needle count is not displayed, press
(Settings key), and then use
the following screen.
• Press (Back key) to return to the embroi-
dery screen.
66
c Press
The confirmation message is displayed.
d Press
The selected pattern is deleted, and the
screen for selecting the embroidery pattern
type is displayed.
e Turn off the machine.
to display
• Always remove the embroidery unit when
you move the machine.
f Turn on the machine and select the pattern.
g Press
(Embroidery key).
.
.