Brother NV1000 Operation Manual page 82

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
f Adjust the stitch width until the needle slightly
catches the fold of the hem.
a Needle drop point
When you change the needle drop point, raise
the needle, and then change the stitch width.
a Stitch width
■ If the needle catches too much of the hem
fold
The needle is too far to the left.
Press
the needle slightly catches the fold of the
hem.
1
a Wrong side of fabric
b Right side of fabric
1
1
to decrease the stitch width so that
2
■ If the needle does not catch the hem fold
The needle is too far to the right.
Press to increase the stitch width so that
the needle slightly catches the fold of the
hem.
1
a Wrong side of fabric
b Right side of fabric
• For details, refer to "Adjusting the stitch
width" (page 56).
g Sew with the fold of the hem against the
presser foot guide.
h Remove the basting stitching.
1
a Wrong side of fabric
b Right side of fabric
2
2
Blind Hem Stitching 81
3