Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY
Embroidery step by step
The basic steps for embroidery are as follows.
1
Presser foot attachment
2
Checking the needle
Embroidery unit
3
attachment
4
Replacing the bobbin case
5
Bobbin thread setup
6
Fabric preparation
Embroidery frame
7
attachment
8
Pattern selection
9
Checking the layout
10
Embroidery thread setup
132
Attach the embroidery foot "Q".
For details on attaching the embroidery foot, refer to "Attaching the
embroidery foot" (page 133).
↓
Use a needle matched to the fabric.
For details on replacing the needle, refer to "Replacing the needle" (page
40).
↓
Attach the embroidery unit.
For details on attaching the embroidery unit, refer to "Attaching the
embroidery unit" (page 136).
↓
When using other kinds of embroidery bobbin thread, use the optional
alternate bobbin case (pink marking).
For details on replacing the bobbin case, refer to "Replacing the bobbin
case" (page 138).
↓
For the bobbin thread, wind embroidery bobbin thread and set it in
place.
For details on setting up the bobbin thread, refer to "Winding/Installing
the Bobbin" (page 23).
↓
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details on preparing the fabric, refer to "Preparing the Fabric" (page
139).
↓
Attach the embroidery frame to the embroidery unit.
For details on attaching the embroidery frame, refer to "Attaching the
Embroidery Frame" (page 143).
↓
Turn the power on, and select an embroidery pattern.
For details on selecting embroidery patterns, refer to "Selecting
Embroidery Patterns" (page 145).
↓
Check and adjust the size and position of the embroidery.
For details on adjusting the layout, refer to "Adjusting the layout" (page
156).
↓
Set up embroidery thread according to the pattern.
For details on setting up the thread, refer to "Upper Threading" (page 29).
Advertisement
Table of Contents
