Download  Print this page

Thread Runs Out Partway Through A Design; Stopping While Embroidering - Brother 885-V35 Operation Manual

Brother sewing machine operation manual.
Hide thumbs

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY
Thread runs out partway
through a design
When the upper thread or the bobbin thread runs out
while sewing, the sewing machine stops. Move the
needle back about 10 stitches and resume sewing.
Memo
When the bobbin thread runs out, cut the
threads and remove the embroidery frame
before replacing the bobbin thread.
a
Set the upper thread or bobbin thread.
b
Press
.
Memo
If the needle count is not displayed, display
the needle count on the screen. For details,
refer to "Stopping while embroidering" (page
166).
c
Press
.
d
Press
(Back one stitch) to move the
needle back about 10 stitches.
(Forward one stitch) increases the stitch
number.
e
Restart the embroidery.
166

Stopping while embroidering

If the embroidery is stopped before it is complete,
check the current needle count and layout before
turning off the sewing machine.
Memo
When the sewing machine is turned off, the
embroidery size and layout return to the
original setting. If you have changed the
layout, you need to adjust it again.
a
Press
(Start/stop button) to stop the
sewing machine.
b
Check the current needle count on the screen
and make a note of it.
If the needle count is not displayed, press
(Settings key), and then use
display the following screen.
Press
to return to the previous screen.
c
Press
(Embroidery key).
The confirmation message is displayed.
to

Advertisement

Table of Contents

   Also See for Brother 885-V35

   Related Manuals for Brother 885-V35

This manual is also suitable for:

V37885-v37Innov-ís 900d

Comments to this Manuals

Symbols: 0
Latest comments: