Capture Panorama Image - Canon VB-C60 Operation Manual

Panorama Creation Tool

Capture Panorama Image

How To Capture
1. Click "Capture" to start capturing
Change the AE lock position as required.
Check the Indoor dome housing (VB-RD51S)
option if you are using the optional indoor dome
housing.
To stop capturing while it is in progress, click "Stop".
2. After capturing is completed, click "OK"
to accept the image
To capture the image again, click "Recapture". Or,
a square section in the displayed grid can be
captured again by double-clicking on that section.
Click "Cancel" to discard the captured image.
Image Stabilizer is canceled temporarily, while Panorama Creation Tool is capturing
an image.
Note
2-8