Canon VB-C60 Operation Manual page 88

Motion Detection Setting Tool
■ Set Up Motion Detection
How To Set up
1. Enable motion detection
Check the "Enable motion detection of the camera" check box.
2. Set the frame rate and camera position
("Camera" tab)
Set the camera's frame rate and position.
The camera position can be set to a desired position
using the viewer for live video, or you can select a
preset in the "Camera" tab.
You need to set the preset settings using Preset
Setting Tool in advance (→ P.2-21).
1Enable frame rate setting
Check the checkbox, so that you can set the frame rate value for motion detection. Enter
the value in the range of 0.5-30.0 fps.
2Enable preset selection
Check the checkbox, so that you can select a preset for the camera position.
The setting value of "Maximum Frame Rate: Image Transmission (→ P.1-19)" should
be larger than the frame rate set in this tool.
Note
● The set frame rate may not be achieved when the network is overloaded.
● When a lower frame rate is set, the motion detection is applied to images extracted
Tip
from the captured video. This enables detecting of objects in slow motion.
● The frame rate set here is applied to the motion detection only.
● Presets, which are set out of the view restriction area, are not displayed in the
preset list.
2-30
1
2