Canon VB-C60 Operation Manual page 112

How to Operate the VB-C60 Viewer
■ Change the Camera's Zoom Magnification
How To Change
Slide up or down the knob on the scroll bar for zoom
The camera zoom magnification changes according to the knob position on the scroll bar.
You can also move the knob by clicking on a blank area on the scroll bar.
● When "Digital Zoom" is set to "Enable" in the "Camera" menu in the setting page,
an icon indicating the optical tele end is displayed (➞ P.1-15).
Tip
● You can also control the zoom magnification using the Camera Control buttons
(➞ P.3-23).
Click on the setting bar for zoom
The camera zoom magnification changes according to the relative position on the setting bar.
You can also change the zoom magnification by clicking on icons positioned on both sides of
the setting bar.
3-14
Admin Viewer
Zoom tele end
Optical tele end (only when digital zoom is ON)
Scroll bar for zoom
Slide up to zoom in (telephoto)
Slide down to zoom out (wide-angle)
Wide end
VB Viewer
Setting bar for zoom
Upper end: the maximum zoom in value
(telephoto)
Lower end: the maximum zoom out value
(wide-angle)