Canon VB-C60 Operation Manual page 83

8 Speed (Z)
Sets the camera speed for zooming within a range of 1-2. Scrolling the slide bar from left to
right increases the value and speed.
9 Pause (sec.)
Set the time duration to pause the camera at the preset position in the range of 0-120 seconds
in increments of 5 seconds.
When the following warning message appears, you may need to change the settings
by referring to the following table.
Note
Example of warning message
*The tour schedule shown in the screen changes depending on the setting.
Press Cancel to return to the setting screen.
Press OK to save the setting data without changing it.
(When using the Preset Setting Tool, click "Save" in the setting page.)
The standard durability of the pan/tilt mechanism is 300,000 round trips at full angle
operation. The entire tour time is determined by the combination of movement speed,
movement range and pause duration. Refer to the following tables for the settings.
Total tour hours (guideline) of Preset Tour in the panning direction until reaching to
300,000 round trips
Setting Speed (PT) to 1
Pause Pan Direction Movement Range (degree)
±50
(sec.)
0 11616
10 17000
20 22666
30 28333
Example: When Speed (PT) is 1, Pause is 30 seconds and Pan Direction Movement
Range (angle) is ±50, 300,000 round trips are completed in 28,333 hours.
● Preset Tour is not performed when the camera is controlled with VB-C60 Viewer or
another viewer.
Tip
● Preset Tour does not work while VK-64/VK-16 (option), VK-Lite or Motion detection
Tool is connecting with the camera.
Setting Speed (PT) to 2
±100 ±150
11475 11427
14166 13222
17000 15111
19833 17000
(Unit: hour)
Preset Setting Tool
Pause Pan Direction Movement Range (degree)
±50 ±100
(sec.)
0 5950 5808
10 11333 8500
20 17000 11333
30 22666 14166
±150
5761
7555
9444
11333
(Unit: hour)
2-25