Screen Control Command; Cf_Screencommand; Cf_Flscrencommand - Canon 7215 - LV XGA LCD Projector Specification

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Acceptable
Response
Unacceptable

8.8 Screen Control COMMAND

8.8.1

CF_SCREENCOMMAND

COMMAND "CF_SCREEN_%1" [CR]
COMPUTER
%1
Select screen size.（Only valid when it is in the usual Power ON status.）
Details
When Input does not meet the requirement for the specified %1, the response
will be "101" [CR], and the Command is not executed.
Acceptable
Response
Unacceptable
8.8.2

CF_FLSCRENCOMMAND

COMMAND "CF_FLSCREN_%1" [CR]
"ON"------ Select Full Screen
%1
"OFF"---- Cancel Full Screen
COMPUTER
Details
Input-VIDEO
Acceptable
Response
Unacceptable
8.8.3 CF_TRUECOMMAND
COMMAND "CF_TRUE_%1" [CR]
"ON"------ Select True
%1
"OFF"---- Cancel True
T Set/Cancel True
Details
Only valid when it is in the usual Power On state and input is COMPUTER.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"NORMAL"............Select 4:3
"WIDE".................... Select 16:9
Input is
"TRUE".................... Select TRUE
"DZOOM_UP".... Zoom Out with DIGITAL zoom
"DZOOM□DN"-- Zoom in with DIGITAL zoom
Input is "NORMAL" ---- Select 4:3
VIDEO "WIDE" -------- Select 16:9 screen
"000" [CR]
"Error Code" [CR]
Set/Cancel Full Screen. (Only valid when it is in the usual
Power ON status.)
The value set by this Command will not be saved to the
Input is projector.
Therefore, when ALL OFF the projector, the value will
return to the original setting. (stay in STANDBYMODE.)
(stays in STANDBYMODE.)
Invalid
series
"000" [CR]
"Error Code" [CR]
"000" [CR]
"101" [CR] ........ Input-VIDEO
Page 25