Functional Execution Command Table - Canon LV-7555 Specifications

MR3P Series Basic Serial Command Function Specification
3.12 About performance when changing INPUT
After receiving INPUT switching command, when receiving commands between 5
seconds from starting the switching to completing the switching, a computer receives
acceptable command, but it is not executed.
However, status read commands are executed after a computer receives response to
accept the command, after 500ms. Response command characters for status read
success are different.
3.13 Command are shown in a capital letter (A • `
available.

4. Functional Execution Command Table

Command
C00 POWER ON
C01 POWER OFF (Quick Power OFF)
C02 POWER OFF
C05 INPUT 1
C06 INPUT 2
C07 INPUT 3
C08 NETWORK
C09 VOLUME +
C0A VOLUME -
C0B AUDIO MUTE ON
C0C AUDIO MUTE OFF
C0D VIDEO MUTE ON
C0E VIDEO MUTE OFF
REGULAR VIDEO IMAGE(4:3• j
C0F
C10 WIDE VIDEO IMAGE(16:9)
C1C MENU ON
C1D MENU OFF
C1E DISPLAY CLEAR
C20 BRIGHTNESS +
C21 BRIGHTNESS -
C23 INPUT 2 VIDEO
C24 INPUT 2 Y,Pb/Cb,Pr/Cr
C25 INPUT 2 RGB
C27 IMAGE
C28 ON START Enable
C29 ON START Disable
C2A POWER MANAGEMENT Enable
C2B POWER MANAGEMENT Disable
C30 D.ZOOM +
C31 D.ZOOM -
See "7, State Read Command" for the details.
Item
Soft Engineer Division
Z). Lower case letters are not
Command
C33 INPUT 3 VIDEO
C34 INPUT 3 S-VIDEO
C35 INPUT 3 Y,Pb/Cb,Pr/Cr
C3A POINTER RIGHT
C3B POINTER LEFT
C3C POINITER UP
C3D POINITER DOWN
C3E MOUSE RIGHT CLICK
C3F ENTER
C43 FREEZE ON
C44 FREEZE OFF
C46 ZOOM -
C47 ZOOM +
C4A FOUCS -
C4B FOUCS +
C4E COLOR MANAGEMENT
C50 INPUT 1 Analog RGB
C51 INPUT 1 SCART
C52 INPUT 1 DVI (PC Digital)
C53 INPUT 1 DVI (AV HDCP)
C54 INPUT 1 Monitor OUT
C5D LENS SHIFT +
C5E LENS SHIFT -
C89 AUTO PC ADJ.
C8A PRESENTATION TIMER
KEYSTONE • ª
C8E
KEYSTONE • «
C8F
KEYSTONE • ¨
C90
KEYSTONE • ©
C91
Item
Page 7 / 24