Turn On Wi-Fi; Network Transmission Parameters - HIKVISION DS-MH2111 Series Quick Start Manual

4.2.2 Turn on Wi-Fi

Purpose:
You can turn on Wi-Fi in local menu.
Step 1 Go to Menu > Network Settings > Wi-Fi.
Step 2 Select Wi-Fi as On.
Step 3 Press to save the settings.
Step 4 Click OK on popup message box to reboot device to take effect the settings.
Step 5 Optionally, after reboot, go to Main Menu > Network Settings > Wi-Fi Information to view
the Wi-Fi Status, SSID, and IP in Wi-Fi Information menu.

4.3 Network Transmission Parameters

Purpose:
To determine the resolution, frame rate, and bitrate used by iVMS platform when it views body
camera image, configure the network transmission parameters.
Step 1 Go to Menu > Network Settings.
Body Camera Quick Start Guide
Figure 4-2 Wi-Fi Parameters
Figure 4-3 Turn on Wi-Fi
16