Result
The white dial icon appears on the status bar, indicating dialing succeeded.
6.3 Connect to Wi-Fi
Set Wi-Fi parameters if you want to connect the device to the network via Wi-Fi.
Steps
Note
Dial-up will be disabled after Wi-Fi is enabled.
●
Wi-Fi cannot be enabled in USB mode.
●
1. Enable the Wi-Fi via the below operations.
- Swipe the screen down to open the notification center. Select
the icon to enter the settings page.
- On the main menu, select Set → Network → WLAN to enable WLAN.
Body Camera User Manual
Figure 6-5 Enable Wi-Fi from Notification Center
19
to enable Wi-Fi. You can hold