Oneida Air Systems CC500 Owner's Manual page 17

Assembly Instructions (Continued)
Locate the shorter cord (capacitive sensor
18
cord) coming from the main switch and
connect it to the capacitive fill sensor installed
to the top of the hopper. Position the cord so
that it is out of the way of the inlet [FIG. 18].
Connect your system power cord to a NEMA
19
L6-30-R outlet [FIG. 19].
Capacitive
Sensor
Cord
FIG. 18
When Strobe is Lit, Pulse Clean Filter
On / Off
Indicator Light
Sonic Alarm
Switch
On / Off
FIG. 19
Capacitive
Sensor
NEMA L6-30-R
System
Power
Cord
oneida-air.com 15