Oneida Air Systems CC500 Owner's Manual page 16

Assembly Instructions (Continued)
If you purchased the optional Onboard
15
Cyclonic Pre-separator please refer to
instructions before proceeding:
• Document #ZBM001501
Connect the Cyclone's (G) inlet to the Cam
16
and Groove Vacuum Hose (L) [FIG 13a].
Secure in place by pulling the levers closed
[FIG 13b].
Familiarize yourself with the CC500's main
17
starter assembly.
a. Alert Strobe - Flashes vibrantly when the
filter needs pulsing or when the capacitive
sensor detects that the hopper is full and
needs to be dumped.
b. Sonic Alarm Switch - Can be toggled to
disable the Sonic Alarm.
c. Sonic Alarm Speaker
d. Indicator Light - Shows when the system is
turned on.
e. On/Off Switch
f. Capacitive Sensor Power Cord
g. System Power Cord
14 Oneida Air Systems, Inc.
FIG. 13a
Open Levers
FIG. 13b
When Strobe is Lit, Pulse Clean Filter
On / Off
Indicator Light
d
b
Sonic Alarm
Switch
On / Off
c
f
Closed Levers
a
e
g