Oneida Air Systems CC500 Owner's Manual page 13

Assembly Instructions (Continued)
THE MOTOR ASSEMBLY IS HEAVY AND CUMBERSOME; BE SURE TO HAVE ADEQUATE HELP WHEN LIFTING!

Carefully lift the Motor Assembly (A) up and
8
attach the 2' vinyl hose to the fitting located at
the top of the Filter (E) [FIG. 8].
Note: There are two vinyl hoses within the
motor assembly to measure filter pressure. The
10" vinyl hose will hang freely in the motor
assembly.
Lower the Motor Assembly (A) over the
9
Filter (E) and down onto the Cyclone's (G)
upper flange. Align the Motor Assembly so its
perimeter is flush with the Cyclone's (G) flange
below it [FIG. 9].
FIG. 8
FIG. 9
oneida-air.com 11