Handlebar Switches - Yamaha MOTO-4 1987 Owner's Manual

Handlebar switches: NOTE:
"ENGINE STOP" switch If the starter switch is pushed with the main
Make sure that the engine stop switch is posi- switch "ON" and the engine stop switch
tioned to "RUN". The engine stop switch "OFF" only the starter motor without the
has been equipped to ensure safety in an engine being activated. To start the engine,
emergency such as when the machine is be sure to position the engine stop switch at
upset or trouble takes place in the throttle the "RUN".
system. The engine will not start or run when
the engine stop switch is turned to "OFF". (_
"LIGHTS" (Dimmer) switch
Turn the light switch to "LO" to turn on the
headlight, (low beam) and taillight. Turn the
light switch to "HI" to turn on the headlight
(high beam) and taillight.
"START" switch
To start the engine, push the starter switch.
1. "ENGINE STOP" switch 2. "LIGHTS" (Dimmer) switch
3. "START" switch
See starting instructions prior to starting
engine.
4-2