Troubleshooting; Warning Signals - Saeco Lirika SUP041EU Instructions Manual

English
11

TROUBLESHOOTING

11.1

Warning signals

This chapter describes all the warning messages that the machine may display to the user and the actions that can and/or
must be performed by the user.
Warning Signals
74
The machine is warming up to brew beverages or dispense hot water.
The machine is performing the rinse cycle.
Wait until the machine has completed the cycle.
The "Intenza" water filter must be replaced with a new one.
Contact the service provider.
The brew group is being reset due to machine reset.
Fill the coffee bean hopper with coffee beans and restart the cycle.
The machine is priming the circuit.
The machine is out of credits.
In this case, only hot water and steam may be dispensed.
To brew coffee, contact the service provider to restore the credits.
The machine requires a descaling cycle.
When this message is displayed, it is still possible to use the machine, but its correct operation
might be affected.
Damage caused by failure to descale the machine is not covered by warranty.
Contact the service provider.
How to reset the message