Warm-Up And Rinsing; Rinse/Self-Cleaning Cycle - Saeco Lirika SUP041EU Instructions Manual

English
9.2

Warm-up and Rinsing

Upon start-up, the machine activates the warm-up phase.
Wait until it is completed.
The progress bar indicates
that the machine is heating
up the system.
Once warm-up has been completed, the machine performs
a rinse cycle of the internal circuits.
The progress bar indicates
that the
performing the rinse cycle
of the system.
A small amount of water is dispensed from the coffee
dispensing spout. Wait until the cycle is completed.
The cycle can be stopped by pressing the "Espresso"
button.
Then the machine is ready for use.
42
machine is
If the machine is used for
the first time or after a
long period of inactivity,
contact
Provider to start it up.
9.3

Rinse/Self-Cleaning Cycle

This cycle allows the internal coffee circuits to be rinsed
with fresh water. This cycle is only carried out at the end
of the warm-up phase in the following cases:
• Upon machine start-up, when the boiler is cold;
• After priming the circuit, if the boiler is cold;
• During the Stand-by preparation phase (if at least one
coffee-based product has been brewed);
• When turning off the machine after pressing the
"Stand-by" button (if at least a coffee product has been
brewed).
A small amount of water will be dispensed to rinse and
heat all the machine parts. This icon is displayed.
Wait for this cycle to be completed automatically. The
dispensing process can be stopped by pressing the
"Espresso" button.
the Service