Page 1
OY L TYPE SUP 015 User's and maintenance booklet We congratulate for having bought this top-quality espresso machine and thank you for choosing Saeco. Before operating the machine, we recommend to read the following instructions thouroughly which explain how to use, clean and maintain the machine.
Reference to figures, parts of the machine The warning triangle shows all important and control elements are given by numbers safety indications to ensure the user’s safety. The non-observance of said instructions or letters, as figure B exemplifies. may cause serious injuries! The first cover page of the manual shows figures relevant to the text.
10cm 10cm Man. Titan 0313.959 ING (UL) Positioning Place the machine on a plane surface, where nobody can turn it upside down or be hurt. Hot Electrical parts should never be in water or overheated steam might escape from the machine: danger of burns! Never use the contact with water: danger of short- circuit! Steam and hot water may coffee machine outdoors or inside rooms with...
IMPORTANT SAFEGUARDS a) A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
The bean coffee container (16) is attached with Do not switch on the machine if the water tank two screws. Remove the cover (15) and fill it with coffee beans (approx. 300 g), then re- is empty. Before using the machine make sure there is enough water in the tank.
Page 8
PROGRAMMING THE COFFEE MACHINE . Press ENT to activate this item. Selecting the prebrewing The display shows: function "WATER HARDN " As soon as the coffee has been moistened, the pump stops for a while. Then, the brewing cycle "HARDNESS 2 "...
Place a cup under the dispensing tube (7) and with cold water. Each cycle is followed by a short pause of about 40 seconds. operate the steam/hot water (9) knob. Fill a cup with water. Preheating cups Never stop the rinsing cycle. Cups may be preheated by placing them on the heating plate.
coffee quantity according to the cup dimension. Adjust the desired grinding degree: the recom- mended average value is 5. By means of the 3 selection keys desired coffee quantity can be chosen. The display shows the selected quantity. The grinding degree must be adjusted only when the coffee grinder is operating, otherwise it may be damaged.
INCORPORATED SAFETY DEVICES / CLEANING/MAINTENANCE cally) until water flows regularly out of the spout Automatic temperature (see section on Drainage, page. 37) and the adjustment display shows This adjustment controls the correct temperature "HOT WATER " for coffee, water, and steam. Coffee brewing is Close the steam/hot water knob.
Page 12
Coffee grinder adjusted according to the water hardness de- gree. The machine has been adjusted at the factory to 25º _H value, which causes the display to switch on showing the message Never fill the coffee grinder with water: it may DESCALING after approx 150 l.
Keep the machine in a dry place, far from the reach of children. Should the machine not be used for a long period, keep it from dust and dirty. Maintenance Periodically check the machine and clean it in accordance to the instructions. Disposal Machines which are no longer operational should immediately be made non serviceable,...
IMPORTANT SAFEGUARDS When using your coffee maker, basic damaged in any manner. Return safety precautions should always be appliance to an authorised service facility followed, including the followed to reduce for examination, repair or adjustment. the risk of fire, electric shock, and/or The use of an accessory not injury to persons including the following: evaulated for use with this appliance may...
Need help?
Do you have a question about the 0347.0CH.77E and is the answer not in the manual?
Questions and answers