Inserting / Replacing Batteries; Start-Up Display; Measuring Building Or Wood Moisture - Powerfix Profi 109791 Operation And Safety Notes

Inserting / replacing batteries

Open the battery compartment
of the device by loosening the screw and re-
moving the battery cover
Insert four new batteries type AAA, 1.5 V
into the battery compartment. Ensure correct
polarity. This is shown in the battery compart-
ment (see Fig. B).
Replace the battery compartment and tighten
the screw.
Start-up
Display
Replace the batteries when this symbol appears.
The scale at the left indicates the wood mois-
ture from 6–44 %.
The scale on the right shows the building
moisture from 0.2–2.0 %.
The temperature is shown on the display in
either Celsius (°C) or Fahrenheit (°F) as
required.
The measurement is shown in the middle of the dis-
play using gauge marks. On the left scale easy
3
line represents 1 %, in the right scale it's 0.05 %.
Measuring building or
wood moisture
Before measuring, first remove the protective
cap .
1
at the back
8
.
7
GB/IE 9