Setting Up The Bean System - Miele CoffeeSelect CM 7750 Operating Instructions Manual

Setting up the bean system

After setting up the coffee machine, you
will be prompted to set up the bean
system. The coffee machine will assist
you when first filling and naming the
bean containers.
 Tap
Yes .
If you select , the assistant for
No
setting up the bean system will not be
shown again.
Filling the coffee bean container
Tip: Open one bean container lid at a
time to prevent the bean types from
mixing when filling the bean system.
 Take one of the lids off.
 Fill this container with the first type of
beans.
 Replace the lid.
 Repeat the steps for the other two
bean containers.
Tip: Make a note of each bean type if
necessary.
After filling the bean containers, you
can now name the types of beans.
Naming the types of beans
The three bean containers are shown in
the display as follows and are pre-
named.
Type A
Type C
If you rename the bean containers,
please note the following:
- Choose concise names (max.
8 characters).
- If you are using the same type of
beans in two or three bean
containers at the same time (for
instance because you only use one
bean type), make sure you name
them in the exact same way.
 Enter the name you want for the
bean container and then tap
A
 Now name the other two bean
containers.
Continue will appear in the display.
allocate the bean types to the coffee
drinks.
Allocating the bean types
Selected coffee drinks are marked
with .
 Select a bean type.
 Now select the drinks that are to be
prepared with this type of bean.
 Select the next bean type and
allocate it to other drinks.
Before first use
Type B
Save
Now
Type
.
29