Set Up The Bean System - Miele 11 674 750 Operating Instructions Manual

Set up the bean system

After setting up the coffee machine, you
will be prompted to set up the bean
system. The coffee machine will assist
you when first filling and naming the
bean containers.
 Touch
.
Yes
If you select No , the assistant for
setting up the bean system will not be
shown again.
Fill the bean container
Tip: Open one bean container lid at a
time to prevent mixing of bean types
when filling the bean system.
 Take one of the lids off.
 Fill the first type of beans in this
container.
 Replace the lid.
 Repeat the steps for the other two
bean containers.
Tip: Make a note of each type of bean if
necessary.
After filling the bean containers, you
can now name the types of beans.
Name the types of beans
The three bean containers are shown in
the display as follows and are pre-
named.
Before using for the first time
Type A
Type C
If you rename the bean containers,
please note the following:
- Choose concise names (max. 8
characters).
- If you are using the same type of
beans in two or three bean
containers at the same time (for
instance because you only use one
type of bean), make sure you name
them in the same way exactly.
 Enter the name you want for the
A bean container and then touch
Save .
 Now name the other two bean
containers.
Continue will appear in the display.
allocate bean types to the coffee drinks.
Allocate type of beans
Selected drinks are marked with .
 Select a bean type.
 Now select the drinks that are to be
prepared with this type of bean.
 Select the next type of bean and
allocate it to other drinks.
Type B
Type
Now
27