Setting Up The Bean System - Miele CVA 7840 Operating And Installation Instructions

Setting up the bean system

After setting up the coffee machine, you
will be prompted to set up the bean
system. The coffee machine will assist
you when first filling and naming the
bean containers.
 Touch
.
Yes
If you select No , the assistant for
setting up the bean system will not be
shown again.
Filling the bean containers
There are two bean container drawers
at the top right and left of the coffee
machine.
 Open the appliance door.
 Pull out the coffee bean containers
and remove their lids.
 Fill the containers with roasted coffee
beans.
 Close the bean containers with their
respective lids.
 Push the coffee bean containers back
into the coffee machine. Close the
appliance door.
Before using for the first time
Useful tip: Make a note of each type of
bean.
After filling the bean containers, you
can now name the types of beans.
Naming the types of beans
The 3 bean containers are shown in the
display as follows and are pre-named.
Type of beans
Type A
Type C
If you rename the bean containers,
please note the following:
– It is best to select short, memorable
names.
– If you are using the same type of
beans in two or three bean
containers at the same time (for
instance, because you only use one
type of bean), make sure you name
them in the same way exactly.
Name type of beans for bean container?
appears in the display and
highlighted orange.
 Touch
Yes .
The editor will open in the display.
 Enter the name you want for the bean
container and then touch
 Now name the other two bean
containers.
Allocate <Type XY>
header line.
Type B
Type A is
Save .
appears in the
27