Connect The Power Cord; Install The Printhead - Canon MultiPASS F80 Setup Sheet

Connect the power cord.

1
Plug the power
cord into a socket.

Install the printhead.

IMPORTANT
• To turn off the machine, be sure to always press [ON/OFF(1sec.)]. This will ensure
that the printhead is capped and prevent it from drying up.
• If you are not using the machine for a long period of time, we recommend that you
print (in black and color) or clean the printhead approximately once a month to
maintain the printhead in good working condition.
Press [Open] q and lift up the scanning unit w. Then remove the tape A.
1
w
q
2
Remove the printhead from its packaging, then remove the orange protective
cap B.
B
LEASE WAIT
Approx. 30 seconds
UT IN CARTRIDGE
2
When you connect
the machine, the
Alarm light blinks,
and the messages
above should
appear in the LCD.
A
IMPORTANT
• Do not touch the electrical contacts C.
C
ON/OFF(1sec.)
03 04
07 08
3
If nothing appears in the
LCD, press [ON/OFF (1 sec.)]
to turn on the machine.
• If you need to turn off the
machine, press [ON/OFF (1 sec.)]
for one second.
IMPORTANT
• Do not touch the metal rod or any
parts inside the machine.
• Do not turn off the machine when
opening the scanning unit.
Turn over to Turn over to
continue continue