Connect Power Cord - Canon imageCLASS MF7280 Starter Manual

Connect Power Cord

1
A
Connect the supplied power cord (A) into the
socket and the wall outlet.
What if...
● <Close the left or front cover.> is displayed:
Make sure that the left or front cover is closed properly.
(See "Install Cartridge," on p. 3.)
● <Load paper.> is displayed:
Make sure that paper is loaded in the machine.
(See "Load Paper," on p. 5.)
● <Insert the toner.> is displayed:
Make sure that the cartridge is installed properly.
(See "Install Cartridge," on p. 3.)
9
2
Press the main power switch to ON ("I" side).
The Start Up screen is displayed until the machine
comes to the ready mode.
The Basic Features screen is displayed when the
machine is ready to scan.
10