Assemble The Machine - Canon MultiPASS F80 Setup Sheet

Remove the shipping material from the machine.
1
Place the machine on a flat surface.
2
Remove all shipping tapes from the exterior of the machine.
Open the document cover A and remove the protective sheet B.
3
Remove the shipping material C as shown below.
4
A
B

Assemble the machine.

1
Attach the multi-purpose tray.
Top rear view of
attachment slots
2
Hook the center tab on the
paper output tray to the
center opening, then lower
the tray.
C
DO NOT remove the USB
USB label D
label D at this stage.
3
Attach the document
tray, then lower it.