Table of Contents
Advertisement
Print the fax directly from the C20
If your computer is going to be off for a while or you are expecting
many incoming faxes, it is recommended that you set the C20 to
automatically print incoming faxes. This recommended setting allows
you to leave the computer off for a period of time and still be assured of
receiving your faxes. You can always later scan a printed fax to the
Desktop Manager.
Save the fax in C20 memory
If you set the C20 to save a fax in memory, the fax can later be printed
directly to the C20, or sent to Desktop Manager when your computer is
turned on. Once a fax is printed, it is erased from the memory of the
C20.
When a fax is saved in C20 memory, a message appears in the LCD
display on your C20.
To move received faxes to the Desktop Manager:
1. Turn on your computer and start Windows.
2. Open the Desktop Manager.
The faxes are automatically moved to the In Box folder in the Desktop
Manager.
n
For information on how your C20 can handle printing a received fax if
there is no paper or toner is low, refer to Chapter 8, "C20 Setup and Other
Utilities in the Desktop Manager."
Chapter 5
PC Faxing 5-13
Advertisement
Table of Contents
