Table of Contents
Advertisement
Error Correction (ECM)
You select this option to reduce system and line errors when sending a
fax. With this option selected, the system checks each outgoing fax for
lost data. If data has been lost from a portion of a page, the system
transmits that portion again after confirming that all data within that
portion can be transmitted successfully.
Off Hook Alarm
You select this option to turn on the alarm if the telephone handset is
off-hook.
Image Contrast
You select a setting that determines the level of contrast in the faxes
you send. The Standard setting is usually appropriate for most
documents. However, based on the lightness or darkness of your
original fax document, you may prefer to lighten or darken the
contrast for the fax transmission.
Fax Heading Position
You select where you want the sent fax heading information (your fax
number, your name, and date and time) to print on the faxes you send.
This information is know as the Transmit Terminal Identification
(TTI).
On Error Resend
You select this option if you want the C20 to automatically redial if an
error occurs while sending a fax. If this option is selected, you also
select which pages should be resent: only the page on which the error
occurred, the page on which the error occurred and the first page of
the fax, or all pages.
R-Key (Europe only)
The R-Key options enable you to define the R-Key settings for your
C20. The options determine whether or not you are connecting your
C20 to a PBX (Private Branch Exchange) line to send PC faxes. If you
are connecting to a PBX, you also select the type of PBX line.
If you are connecting to a PBX line, you select PBX. Otherwise, you
select PSTN.
8-8 C20 Setup and Other Utilities in the Desktop Manager
Chapter 8
Advertisement
Table of Contents
