Defining a Custom Print Model
For a custom print model, you set the colour , halftoning, and intensity
option for your graphics. You set these options after having selected the
custom print model and clicking Options on the Graphics tab (as
described in the previous section).
1. In the Custom Setting dialog box, under Colour Selection, click the
option that specifies the number of colour shades that should be used
to print your document:
The option is available only if you set the Colour Model option on the
Graphics tab to Colour.
3-12 Printing with the C20
Full Colour
Supports over 16 million colours, but with somewhat slower
performance
Fast Colour
Supports up to 262,000 colours with good performance.
Chapter 3