Canon imageCLASS D880 Fax Manual page 76

2.PRINT IN ORDER
ON
OFF
3.TONER SUPPLY LOW
KEEP PRINTING
RX TO MEMORY
SYSTEM SETTINGS
1.FAX DEFAULT
1.RESOLUTION
OFF
STANDARD
FINE
PHOTO
SUPER FINE
ULTRA FINE
2.BOOK TX SCAN SIZE
2.LOCK PHONE
OFF
ON
9-8
Name Description
Sets the order of printing.
Arranges received faxes in the order they were sent.
Printing does not start until all pages are received.
Arranges received faxes in reverse order.
Allows you to set whether the machine stores the
document in memory when the toner supply is low or
ignores the warning and keeps printing until the
document is completely printed. This setting is
convenient if a new cartridge is not at hand.
The keep printing function is turned on. With this setting,
the machine does not store documents in memory if the
toner has run out. Reset to RX TO MEMORY after
replacing the cartridge with a new one.
The machine receives the document in memory.
Sets the functions of FAX DEFAULT and LOCK
PHONE.
Sets the FAX DEFAULT functions.
Sets the fax resolution.
The setting of resolution set using FAX Resolution
remains even after the AUTO CLEAR function activates.
Suitable for most text only documents.
Suitable for documents containing fine print.
Suitable for documents that contain photographs.
Suitable for documents that contain fine print and images
(the resolution is four times that of STANDARD).
Suitable for documents that contain fine print and images
(the resolution is eight times that of STANDARD).
When you select SHEET:
Before sending a fax, you must press Book Sending
and specify the scanning size of either LGL or LTR.
When you select LGL or LTR:
The document will be scanned in the size you selected,
either LGL or LTR.
SHEET, LGL, LTR
Sets the LOCK PHONE functions.
The telephone or fax transmission can be used normally.
The telephone transmission cannot be used. The
telephone reception and fax transmission/reception can
be used.
(The factory default setting is in bold face.)