Press Start - Canon imageCLASS D880 Fax Manual

Enter up to 122 fax numbers using any of
the following methods:
❚ One-touch speed dialing:
Press the desired one-touch speed dialing
key(s).
T E L =
0 4 C a n o n I T A L I A
Ex:
❚ Coded speed dialing:
Press Coded Dial, then use the numeric
keys to enter the two-digit code.
Repeat for other codes.
T E L = 1 4 9 3 9 2 5 2 5
0 2 C a n o n F R A N C E
Ex:
❚ Regular dialing:
Use the numeric keys to enter the fax
number, then press Set.
T E L = 9 0 5 7 9 5 1 1 1 1
Ex:
• If you enter an incorrect destination, press
Clear to delete it.
NOTE
• You must enter the second fax number
within five seconds of entering the first
one. After that, all subsequent fax numbers
must be entered within 10 seconds of each
other. If you wait longer than this, the
machine automatically begins scanning the
document for sending. If you prefer the
machine not to do this, disable the TIME
OUT setting. (→ p. 9-6)
• If you want to review the numbers you
entered, press 4 (–) or e (+) to scroll
through the numbers.
2 5 0 9 2 1

Press Start.

• When scanning is complete, the machine starts to
dial the number.
• The machine will first send the document to the
one-touch speed dialing destinations, then the
coded speed dialing destinations, and finally to the
destination dialed using regular dialing.
• If you prefer not to start scanning automatically in
5 or 10 seconds after dialing, disable the TIME
OUT setting. (→ p. 9-6)
• To cancel sending, press Stop/Reset then press
4 (–). Sending to all destinations specified in Step
3 will be canceled. You cannot cancel just one
destination.
After canceling, the machine will print a MULTI
TX/RX REPORT. (→ p. 7-4)
• If a number is busy, the machine will
continue sending to the other destinations
NOTE
and then redial the number that was busy.
4
4-9