Standby Display; Making Connections; Connecting To The Telephone Line And An External Device - Canon imageCLASS D880 Fax Manual

Standby Display

The standby display differs depending on which mode is selected. When the machine is plugged in, the Copy
Mode standby display appears. You can switch from the Copy Mode to the Fax Mode by pressing FAX.
The standby display in the Fax Mode is as follows:
■ Fax Mode
Receive Mode
• The standby display in the Copy Mode → Basic Guide.
NOTE

Making Connections

Connecting to the Telephone Line and an External
Device
The machine has two jacks on the left side for connection of the following:
: Telephone line
: External device, such as a telephone or an
answering machine
1
Connect the supplied
telephone cable to the
jack, then connect the other
end of the cable to the
telephone jack on your wall.
Date & Time
Fax Resolution
2
If you need to send and
receive faxes and voice calls,
connect the cable from the
telephone or answering
machine to the jack.
1
1-3