Canon imageCLASS D880 Fax Manual page 73

Name
6.OFFHOOK ALARM
ON
OFF
REPORT SETTINGS
1.TX REPORT
OUTPUT NO
PRINT ERROR ONLY
REPORT WITH TX IMAGE
ON
OFF
OUTPUT YES
2.RX REPORT
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
3.ACTIVITY REPORT
ON
OFF
TX SETTINGS
1.ECM TX
ON
OFF
2.PAUSE TIME
Description
Enables/disables the offhook alarm that alerts you when
the handset is not in the handset cradle.
After reception, the offhook alarm sounds when the
handset of extension telephone is left off the hook.
No offhook alarm.
Sets the report setting.
Enables/disables automatic printing of a transmission
report.
No report is printed.
Prints a report only when a transmission error occurs.
If you select PRINT ERROR ONLY or OUTPUT YES,
enables/disables printing of the first page of the fax under
the report.
Prints a first page only when a transmission error occurs.
The first page is not printed.
Prints a report every time you send a document.
Enables/disables automatic printing of a reception report.
No report is printed.
Prints a report only when a reception error occurs.
Prints a report every time you receive a document.
Enables/disables automatic printing of an ACTIVITY
REPORT after every 20 transactions.
Prints the ACTIVITY REPORT.
The ACTIVITY REPORT is not printed.
Sets the transmission functions.
ECM (error correction mode) transmission is turned on
or off.
All transmissions are conducted with ECM if the other
party's fax supports ECM.
ECM is turned off.
Sets the length of the pause you insert into a dialing
sequence.
1 to 15 SEC (2 SEC)
(The factory default setting is in bold face.)
9
9-5