Troubleshooting; Technical Data - Vitalmaxx CLSM2905 Instruction Manual

Troubleshooting

If the device should stop working properly, fi rst check whether you are able to correct
the problem yourself. Otherwise you should contact the customer service department.
Do not attempt to repair a defective device yourself!
Problem
The device does
not work.
No heat is produ-
ced.

Technical Data

Article number:
Model:
Voltage supply:
Power:
Mains adapter:
Model:
Input voltage:
Output voltage:
Protection class:
Possible cause
The device is not receiving
any power supply.
The PWR button was not
(correctly) pressed.
All massage zones are deac-
tivated on the controller.
The device is not switched
on.
The heat function is not swit-
ched on.
Z 04877
CLSM2905
12V DC
9.6 W
GQ15-120080-AG
220 - 240 V ~ 50 Hz
12V DC
II
Check whether
• all cables are correctly con-
nected to each other.
• the mains adapter is inserted
in the plug socket..
• the plug socket is defective.
• the fuse of your mains con-
nection is inserted.
Press the PWR button.
Press the button for a massage
zone to activate it. The associa-
ted LED ought to light up.
Press the PWR button. The LED
must light up.
Press the WÄRME (HEAT) but-
ton. The LED must light up.
18
Solution