Cleaning And Storage; Troubleshooting - Vitalmaxx 03926 Instruction Manual

5. Press the button for clockwise (6) or anticlockwise rotation (7). The massage starts.
To switch sides, simply press the corresponding button.
6. Press the button for the heat function (8) to switch it on. Press the button again to
switch the heat function (8) off again.
7. After 15 minutes the device automatically switches off. To switch it off sooner, press
the I / O button (5).
8. Pull the mains adapter out of the plug socket and clean the device if necessary.

Cleaning and Storage

CAUTION!
■ Remove the mains adapter from the plug socket before cleaning the device.
■ Never immerse the device, the mains cable or the mains adapter in water or other
liquids! No liquid must be allowed to enter the device during cleaning.
■ Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
• Make sure that the device is switched off and the mains adapter has been removed
from the plug socket!
• Wipe down the device just with a damp cloth if necessary. Then wipe it down fully
with a dry cloth.
• Do not wind the mains cable around the device or the mains adapter.
• Keep the device in its respective packaging in a dry place which is protected from
sunlight and is not accessible to children and animals.

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the prob-
lem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work.
No heat is produced.
03926_DE-EN-FR-NL_A5_V1.1.indb 15 03926_DE-EN-FR-NL_A5_V1.1.indb 15
15
Possible cause / solution
• Has the I / O button (5) been pressed properly?
• Is the mains adapter inserted in the plug socket?
• Is the plug socket defective? Try another one.
• Check the fuse of the mains connection.
• Is the connecting cable connected correctly to the mains
cable of the mains adapter?
• The device has switched off automatically after operating
for 15 minutes. Press the I / O button (5) again.
• There is too much weight on the device.
• Is the heat function (8) switched on?
EN
17.02.2017 09:36:46 17.02.2017 09:36:46