Troubleshooting - Vitalmaxx YC-303D5 Instruction Manual

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the
problem yourself. If the problem cannot be solved with the steps that are listed, contact
the customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work.
No heat is produced.
The device gets too
warm.
The device makes
noises.
Smoke emerges from
the device.
19
Possible cause
The ON / OFF button was not
pressed correctly.
The mains adapter is not
inserted in the plug socket
or the connecting cable (6)
is not connected correctly to
the mains cable of the mains
adapter.
The plug socket is defective.
The device has switched off
automatically after operating
for 15 minutes.
The fuse is defective.
The mains adapter is defec-
tive.
Red light and heat are not
switched on.
The device was in operation
several times in succession
for 15 minutes / too long in
each case.
No error.
The device is defective.
Fix
Press the ON / OFF button
again.
Correct the fi t.
Try another one.
Press the ON / OFF button
again.
Check the fuse of the mains
connection.
Try another mains adapter if
necessary. Otherwise contact
our customer service depart-
ment.
Press the Heat button to
switch on the red light and
heat as well.
Pull the mains adapter out of
the plug socket and allow the
device to cool down.
Operating noises are a nor-
mal consequence of the me-
chanics and not a defect.
Pull the mains adapter out of
the plug socket immediately
and contact the customer ser-
vice department.
EN