Cleaning And Storage - Vitalmaxx CLSM2905 Instruction Manual

massage to your liking and activate the heat function (see the "Device Overview"
chapter", "Controller" section). You can also switch on the heat function exclusively
by pressing the WÄRME (HEAT) button instead of the PWR button.
5. Set the massage/heating duration (15, 30 or 60 minutes) with the TIMER button. We
recommend that you choose 15 minutes.
6. You can keep the controller inside the pocket on the side of the device during use.
7. When the set time has elapsed, the device switches off automatically. You can also
switch it off at any time by pressing the PWR button.
8. Remove the mains plug and disconnect the cable from the device.
9. Allow the device to cool down if the heat function was activated before you put it
away or clean it.
10. Fold up the seat cushion and put all parts into the packaging. Store the device in a
dry place that is not accessible to children.

Cleaning and Storage

CAUTION!
❐ Disconnect the device from the mains power before you do any cleaning.
❐ The massage seat cushion and all the accessories must not get wet.
❐ Do not use any caustic or abrasive cleaning agents to clean the device. These can
damage the surface.
• Make sure that the device is not connected to the mains power and has cooled
down.
• Clean the device only with a slightly damp cloth.
• When storing it away, do not press the device together too strongly and do not use
force. It could be damaged.
• Do not wrap the mains cable around the mains adapter.
• Keep the device in its respective packaging in a dry place which is protected from
sunlight and is not accessible to children.
17