Troubleshooting Guide - Permobil X850 Corpus 3G User Manual

6.1

Troubleshooting guide

Event
The wheelchair does not start.
The wheelchair cannot be charged.
The wheelchair cannot be driven.
64 - Troubleshooting
Possible cause
The batteries are discharged.
The cable connection to the control panel
has come loose.
The main circuit breaker is turned off.
The main circuit breaker has tripped.
The main circuit breaker is turned off.
The charging circuit breaker has tripped.
The battery charger is connected.
The wheelchair is in freewheel mode.
The wheelchair is locked.
The motors have become too warm.
Remedy
Charge the batteries.
Insert the cable in the control panel.
Turn on the main circuit breaker. See
page 41.
Reset the main circuit breaker once. See
page 41.
Turn on the main circuit breaker. See
page 41.
Contact your service provider or Permobil
technical support for assistance.
Disconnect the battery charger.
Exit freewheel mode and restart the
wheelchair.
Unlock the wheelchair.
Turn off the wheelchair and wait for the
motors to cool down.