Technical Support - PEAKnx Controlmicro Getting Started

EN Controlmicro, Getting started
Software
The panel can be operated both with the supplied YOUVI software and with other Windows-
compatible software.
Tip: After commissioning and setting up the panel, we recommend that you create a backup

using the optionally available recovery stick from PEAKnx.
Operating system
The operating system used is Microsoft Windows 10 IoT Enterprise LTSC. Other programs for
the visualization of building information and for building control can be installed later.
Note: PEAKnx provides no service and no warranty for software products from other com-


panies as well as in case of OS driver updates.
YOUVI Software package
The YOUVI Basic visualization software included in the scope of delivery is used to control
KNX devices such as sockets, switches, lights, dimmers, RGB lights, heaters, blinds or shutters.
Thanks to the IP router included in the software package, the panel can run YOUVI's visualiza-
tion without an external server or additional bus coupler. Only the connection to the IP network
and the KNX bus (via the integrated KNX connection on the panel) is necessary.
Note: Everything else about the start with YOUVI can be found in the also delivered short


guide.

Technical support

If you experience problems with your Controlmicro, please contact our PEAKnx Support Team:
− Mail: support@peaknx.com
− Create a Support Ticket: support.peaknx.com
− Phone: +49-6151-279 1825
20