Download Print this page

PEAKnx Controlmicro Getting Started page 19

Hide thumbs Also See for Controlmicro:

Advertisement

Available languages

Available languages

Switching the Controlmicro on and off
Note:
In the delivery state, the panel automatically logs on with the user name Controlmicro

without a password. After the Login, additional users can be added at any time or further set-
tings may be changed in the Windows Settings.
Switching On
The panel turns itself on after the fuse is turned on.
Note:
In normal operating conditions it is not necessary to switch off the Controlmicro.

If you need to restart the panel after shutdown, there are 2 ways:
a)
Disconnect the circuit breaker of the panel.
This procedure is suitable if the anti-theft screws have been used.
b)
Disconnect the panel from the mounting plate so that the power supply is cut off.
Then reconnect the panel to the mounting plate or turn the fuse back on.
The panel starts.
Switching Off
Tap the Windows logo on the Windows Start screen, select the On/Off icon and select the
option "Shut down".
Controlmicro panel settings
This tool gives you access to the CO2
value and to the brightness value, to
the ambient light and the proximity
sensor.
In the taskbar you have access to the
application:
EN Controlmicro, Getting started
19

Advertisement

loading
Need help?

Need help?

Do you have a question about the Controlmicro and is the answer not in the manual?

This manual is also suitable for:

Pnx13-10001