Maintenance; Clean The Case; Lens Care; Battery Care - Fluke TiS55+ User Manual

Thermal imager
Table of Contents

Advertisement

TiS55+/TiS75+
Users Manual

Maintenance

The Product requires minimum maintenance.

Clean the Case

Clean the case with a damp cloth and a weak soap solution. Do not use abrasives, isopropyl
alcohol, or solvents to clean the case.

Lens Care

To prevent damage to the infrared lens:
Carefully clean the infrared lens. The lens has a delicate anti-reflective coating.
Do not clean the lens too vigorously because this can damage the anti-
reflective coating.
To clean the lens:
1. Use a pressurized can of air or a dry nitrogen-ion gun, if available, to blow off the
particulates from the lens surface.
2. Soak a lint-free cloth in a commercial lens cleaning liquid that contains alcohol, ethyl
alcohol, or isopropyl alcohol.
3. Squeeze the cloth to remove excess liquid.
4. Wipe the lens surface in one circular motion and discard the cloth.
5. If needed, repeat with a new lint-free cloth.

Battery Care

To get the best performance from the lithium-ion battery:
Do not charge the Product for more than 24 hours as reduced battery life may result.
Charge the Product for at least 2.5 hours every six-months for maximum battery life.
Without use, the battery will self-discharge in approximately six months.
44
1.800.561.8187
W Caution
www.
.com
information@itm.com

Advertisement

Table of Contents
loading

Table of Contents