Table of Contents
Advertisement
3. The Imager will take images as configured.
Start temperature trigger Auto Capture:
1. Postion the camera and set the markers and spot boxes as required.
2. Select
(
appears on the display.
The Imager will take images when the temperature of the marker, center point, or spot
box reaches the trigger condition.
Bluetooth Headset
Connect a Bluetooth Headset to support audio features.
To connect a Bluetooth Headset:
1. Put the Bluetooth Headset into pairing mode.
2. On the Imager, select
The Imager starts to scan and presents a list with of available devices. You can expect a
short delay before the scan is complete.
Tap the headset to select it.
The headset willl connect and show on the My Devices list. A headset icon displays in
Camera mode.
Date
The date shows as: MM/DD/YY or DD/MM/YY.
To set the date:
1. Select
2. Select MM/DD/YY or DD/MM/YY.
s
3. Push
4. Select Set Date.
s
5. Push
6. Push
7. Push / to change the day, month, or year.
s
8. Push
1.800.561.8187
s
> Capture Settings > Start Capture.
s
> Bluetooth Headset > On.
s
> Date.
to set the new format.
to open the Set Date menu.
/
to select Day, Month, or Year.
to set the date and exit the menu.
www.
information@itm.com
.com
Thermal Imager
Settings Menu
35
Advertisement
Table of Contents
