Table of Contents
Advertisement
Display Menu
Use the Display menu to set which features show on the display. To show the Fluke logo on
the display, see
Option
Spot Temp
(Min/Max)
Markers
Spot Boxes
Center Point
Scale
Status Bar
Marker
Use a fixed-temperature spot marker to show the temperature at the point before you save
an image.
To set a marker:
1. Select
2. Select the number of markers.
The marker symbol (+) shows on the display.
3. Drag the marker or push
s
4. Push
5. Continue to set markers. On the final marker push
On the camera screen you can tap and drag markers at any time.
1.800.561.8187
Settings
Menu.
Turn on or turn off the maximum and minimum temperature
indicators on the display.
The Spot Temperatures are floating HI and LO temperature
indicators that move on the display as the temperature
measurements of the image fluctuate.
Set the number of fixed-temperature spot markers. See Marker.
Sets a temperature reference mark. See Delta-T.
Set the number of temperature measurement zones (boxes) that
centers on a target. See
Turn on or turn off the Center point marker and Center point
temperature.
Turn on or turn off the Scale.
Turn on or turn off the Status bar.
m
> Markers.
W
to set the change and go to the next marker.
www.
Table 12
lists the options in the Display menu.
Table 12. Display Menu
Description
Spot
X
Y
Z
/
/
/
.com
Thermal Imager
Box.
to move the marker on the image.
s
to exit.
information@itm.com
Display Menu
19
Advertisement
Table of Contents
