New Block Function - Brother P-Touch 2450DX User Manual

Tape widths
6 mm
9 mm
12 mm
18 mm
24 mm
The return key can also be used to select an item from a list (e.g., add a symbol or accented
character to the text) or to apply a selected setting.
Some questions asking you to confirm a command may appear on the LCD display, especially
when the function that you have chosen will delete or affect files. In these cases, pressing
r is like answering "yes".
To answer "no", press *. Refer to DELETE KEY on page 58.
To add a new line:
Press r. The return mark (
G
To select an item from a list:
Press r.
G
To answer "yes":
Press r.
G
Whenever the number of lines in a section of the text changes, a new block must be created.
A single label can only contain a maximum of five blocks. If five text blocks already
exist when c is held down and r is pressed, the error message "5 BLOCK
LIMIT!" appears.
If the cursor is positioned in the middle of a text block when c is held down and
r is pressed, the block splits into two and the character to the right of the cursor's
current position becomes the beginning of a new block.
To add a new block:
Hold down c and press r once. The new block mark (
G
to indicate the end of the block.
Maximum number of lines that can be printed
) appears to indicate the end of the line.

NEW BLOCK FUNCTION

2
2
3
5
7
) appears in the text
55