Error Message List - Brother P-Touch 2450DX User Manual

Error Message
1 BAR CODE
PER BLOCK!
4 DIGIT
MIN.!
5 BLOCK
LIMIT!
7 LINE
LIMIT!
BATTERIES
WEAK!
BUFFER
EMPTY!
BUFFER
FULL!
CASSETTE
CHANGED!
106

ERROR MESSAGE LIST

Cause
This message appears if a bar code
has already been added to the block
when you try to use the Bar code
function.
This message appears when less than
the minimum four digits are entered
as bar code data.
This message appears if five blocks
already exist when you hold down
c and press r.
This message appears if seven lines
already exist when you press r.
This message appears when the
installed alkaline batteries become
weak.
• This message appears if you hold
down c and press T, but
no text has been entered in the dis-
play.
• This message appears if you try to
print or store a text file in the
memory, but no text has been
entered in the display.
This message appears if you try to
enter a character, symbol, return or
space after 255 characters have
already been entered.
This message appears if the tape cas-
sette is changed while the P-touch is
receiving data from the computer.
Remedy
Limit the number of bar codes in
a block to one.
Enter a minimum of four digits
before pressing r.
Limit the number of blocks in
the text to five.
Limit the number of lines to
seven.
Replace the batteries or use the
AC adapter.
• Enter some text before starting
the function.
• Enter text before printing or
storing.
Delete some existing text so that
more text can be entered.
Cancel the print job, install the
correct tape cassette, and then
try printing again.