EDITING A LABEL
Entering and Editing Text
Entering Text from the Keyboard
(
)
/
[Create Label]
Adding a New Line
Move the cursor to end of the current line and press (
Line 1
NOTE
• There is a maximum number of lines of text that can be entered for
each tape width. A maximum of 7 lines for 0.94" (24 mm) tape, 5 lines
for 0.70" (18 mm) tape, 3 lines for 0.47" (12 mm) tape, 2 lines for 0.35"
(9 mm) and 0.23" (6 mm) tape, and 1 line for 0.13" (3.5 mm) tape.
• When [Input Mode] is set to [Label View], if you press (
a new line and there is already a maximum number of lines of text that
can be entered for the tape you are using, [Too Many Lines!] is
displayed. When [Input Mode] is set to [Print Preview], if you press
(
) and seven lines already exist, [Too Many Lines!] is displayed.
Press (
) or any other key to clear the error message.
Adding a New Block
To create a new block of text/lines to the right of your current text, press
(
) and (
NOTE
• A maximum of 5 blocks can be entered in one label.
• If you press (
Many Blocks!] is displayed. Press (
error message.
Deleting Text
By pressing (
To delete all text:
(
)
/
[Text Only]
(
Line 2
). The cursor moves to the start of the new block.
) and (
), the letters will be deleted one by one.
(
) or (
) or (
)
Enter the character.
Label image
) when five blocks already exist, [Too
) or any other key to clear the
).
).
) to add
Entering and Editing Text
16