Horizontal Alignment Function - Brother P-Touch 2450DX User Manual

1 While holding down c, press E once, and keep c held down to display the
current tape margin setting.
2 While still holding down c, continue pressing E until the desired tape margin
setting is displayed.
3 Release c to apply the selected tape margin setting to the entire text.
EXAMPLE
To select the HALF tape margin setting:
1
While holding down
and keep
2
While still holding down
E
ing
c
3
Release

HORIZONTAL ALIGNMENT FUNCTION

You can choose to align the text in one of three ways. In addition, if the Length function was
used to set the length of the label, the text will align within the label according to the selected
horizontal alignment setting.
The default horizontal alignment setting is LEFT; however, two other settings are also availa-
ble.
LEFT
CENTER
c
, press
c
held down.
c
until HALF is displayed.
.
E
once,
Alt
Caps
, continue press-
Alt
Caps
RIGHT
85