Brother P-Touch 2450DX User Manual page 28

8 The "Choose Product Components" dialog
box appears.
Select the installation method.
•For a typical installation
Click "Next" to immediately start installing
all options.
About 20 MB of available hard-disk
space is needed to begin installation.
In order to install all options, about
100 MB of available hard-disk space is
needed.
•For a minimal installation
Select "Minimal" from the Feature Set list,
and then click "Next" to start installing just
the P-touch Editor 3.2 application.
If certain options (such as the Auto For-
mat Templates and the Clip Art) are not
installed, some P-touch Editor func-
tions may not be available.
•For a custom installation
Select "Custom" from the Feature Set list to
display the list of options that can be
selected for installation.
Only the options with a check mark beside
them will be installed. Select the options
that you wish to install, and then click
"Next".
9 The "Choose Alias Folder" dialog box
appears, allowing you to select where an
alias to P-touch Editor 3.2 will be added.
Select the desired location for the alias, and
then click "Next".
24