Printing a Label Using the P-touch Labeling System Keyboard
Inserting a Tab
To insert a tab into an existing line of text, move the cursor to the character at the position where you want to
insert a tab, and then press the Tab key.
The inserted tab appears as a mark ( ) in the label creation screen.
Note
To delete a tab from a label, position the cursor to the right of the tab mark on the label creation screen,
and then press the BS (Backspace) key.
Changing the Tab Length
a
Press the Format key.
b
Select [Tab Length] using the
c
Select the tab length you want using the
Note
• The tab length can be set to between 0.0" and 4.0" (0 mm and 100 mm).
• To return to the label creation screen, press the Esc key.
• You can also set the tab length by typing in the tab length you want. To apply the setting, after typing in
the tab length, press the OK or Enter key, and then press the OK or Enter key again.
Adding a New Block
You can create up to 99 new blocks. To create a new block of text and lines, press the Shift and Enter keys.
The text to the right of the cursor will be moved to the new block. In some label types, you can set the number
of blocks when selecting the label type.
or
key.
or
key, and then press the OK or Enter key.
2
2
2
2
17