Introduction; Purpose; Contact Us; Reference Documents - Siemens ST950 Handbook

1 I
NTRODUCTION
1.1

Purpose

The purpose of this handbook is to describe the procedures for the Installation and
Commissioning of the ST950 LV Controller and to provide guidance on routine
maintenance and fault finding.
This handbook has been created in accordance with the requirements of BS EN
12675:2001 and BS 7987:2001.
Ongoing development means that some of the delivered items may differ
in detail from the photographs included in this handbook.
1.2

Contact Us

If you have any comments on this handbook, or need any further information, you
can contact us at trafficwebmaster.stc@siemens.com.
1.3

Reference Documents

1.3.1 Controller (Essential)
Publisher Reference Number
ITS
ITS
ITS
ITS
ITS
ITS
1.3.2 Cabling (Essential)
Publisher Reference Number
ITS
ITS
Security classification
Version
Last Editor
Document Name
Copyright © Siemens Mobility Limited 2018. All Rights Reserved.
667/SU/46000/000
667/HB/46000/000
667/HH/46000/000
667/HU/46000/000
667/DA/46000/001
667/GA/33900/ETC
667/HE/20664/000
667/HE/20663/000
Unrestricted
5
Neil Atkinson
ST950 ICM Handbook
Sopers Lane, Poole, Dorset, BH17 7ER
Document Title
Use of ST950 Firmware and Hardware
Configurations
ST950 Family General Handbook
ST950 Family Handset Handbook
ST950 User Interface Handbook
ST950 LV UK Power Circuit Diagram
General Assembly Schematic
Document Title
Installation and Commissioning Handbook -
Installation Testing (General)
Loop Detector and Cable Terminations –
Installation and Commissioning
Page
Status
Date
Document No.
Intelligent Traffic Systems
7 of 125
Issued
18-Dec-2018
667/HE/46950/000